# Integrating Process Management and GRC: Introduction to the Expert Series

> Der Artikel von SwissGRC® erklärt, wie Prozessmanagement und GRC über eine gemeinsame Prozessarchitektur zu einem integrierten Managementsystem werden. Er richtet sich an Organisationen mit IKS, Risikomanagement oder dokumentierten Prozessen und leitet die fünfteilige BPM-Expertenserie ein.

- URL: https://swissgrc.com/en/integrating-process-management-and-grc-introduction-expert-series/
- Publisher: SwissGRC®
- Published: 2026-11-17
- Last updated: 2026-11-17

## Key facts

- Risiken entstehen dort, wo Prozesse ausgeführt werden, und Kontrollen wirken nur, wenn sie an der richtigen Stelle im Ablauf verankert sind.
- Werden Prozesse, Risiken und Kontrollen in getrennten Tools verwaltet, entstehen doppelte Datenerfassung, widersprüchliche Informationen und hoher Aufwand bei Audits.
- Mit der Prozessarchitektur als gemeinsamem Rückgrat werden Rollen, IT-Systeme, Anforderungen, Risiken und Kontrollen an einer Stelle verknüpft und nur einmal gepflegt.
- In der Schweiz, Deutschland und Österreich verlangen Gesellschaftsrecht und Aufsichtsbehörden (FINMA, BaFin, FMA) ein angemessenes und wirksames internes Kontrollsystem.
- Die fünfteilige BPM-Expertenserie von Swiss GRC entsteht in Zusammenarbeit mit MINT Process Solutions und folgt den fünf Phasen des BPM-Lebenszyklus.
- Jeder Beitrag der Serie enthält einen konkreten Ansatz, typische Stolpersteine, eine Checkliste, Key Takeaways und einen Reifegrad-Selbstcheck.

Business processes determine how an organisation delivers its services, how quickly it responds to change and how reliably it meets requirements. Process management makes these workflows visible, manageable and improvable. However, it only unfolds its full value when it is not operated in isolation but forms an integrated management system together with governance, risk management and compliance. This article shows how process management and governance, risk management and compliance can be brought together into an integrated management system.

In brief

Process management only unfolds its full value in combination with governance, risk management and compliance. This article shows why business processes are the common point of reference for this and how an integrated management system emerges from it. Connecting process management and GRC creates a shared foundation for steering processes transparently, addressing risks in a targeted way and ensuring the effectiveness of controls in a traceable manner.

5phases in the BPM lifecycle

6levels of value

1shared process architecture

## What does process management deliver?

Systematic [process management](https://swissgrc.com/en/bpm-software/) creates transparency about who does what, when and with which systems. On this basis, value is created on several levels.

Six levels of valueWhat systematic process management delivers for the organisation

01Efficiency and qualityWorkflows can be simplified, standardised and automated in a targeted way. Errors, duplicated work and lead times decrease, and customers receive more reliable services.

02ManageabilityClear responsibilities and process KPIs show where a workflow achieves its objectives and where it does not.

03Compliance and risk managementDocumented processes show where risks arise and where controls need to take effect. They therefore form the basis for a traceable internal control system.

04Business continuityOrganisations that know their critical processes can define targeted emergency measures and keep business running even in exceptional situations.

05AdaptabilityNew regulatory requirements, reorganisations or system rollouts can be implemented faster when it is clear which workflows are affected.

06Knowledge retentionKnowledge about workflows is no longer tied to individual people. This makes onboarding new employees and collaborating across departments easier.

Process management thus becomes the starting point for transformation and digitalisation. No digitalisation initiative and no reorganisation can succeed without a clear understanding of the workflows involved.

## Why do process management and GRC belong together?

In many organisations, processes are documented while an [internal control system](https://swissgrc.com/en/internal-control-software-ics/), [risk management](https://swissgrc.com/en/risk-management-software/) and a [compliance function](https://swissgrc.com/en/compliance-software/) are operated at the same time. However, these disciplines often work side by side. Processes are modelled in one tool, risks are recorded in a spreadsheet and controls are evidenced in yet another system. The result is duplicate data collection, contradictory information and a high effort for every internal or external audit.

Yet governance, risk management and compliance share a common point of reference: the business processes. Risks arise where processes are executed. Controls are only effective when they are anchored at the right point in the workflow. And regulations, directives and work instructions ultimately define how processes should run. When the process architecture is used as a shared backbone, roles, IT systems, requirements, risks and controls can be linked in one place. The result is an integrated management system in which every piece of information is maintained only once and the same foundation applies to everyone involved.

The process architecture as a shared backboneAll GRC elements are linked to the processes in one place

RolesIT systemsRequirementsRisksControls

Process architectureEvery piece of information is maintained only once. The same foundation applies to everyone involved.

The demands on this integration are growing. In Switzerland, Germany and Austria, company law and supervisory authorities (FINMA, BaFin, FMA) require an appropriate and effective internal control system, and statutory auditors are examining its design increasingly critically. An ICS that is not anchored in the processes, however, can only be kept up to date and evidenced with considerable effort.

## Which starting point leads to the goal?

Organisations come to this topic in different ways. What matters is not where an organisation stands today, but that it takes the next step deliberately and in a structured way.

Two starting points, one goalWhether the processes or the ICS came first: integration is the logical next step

Starting point AProcesses are documentedA process map and processes exist, while risks and controls are managed separately.Next step: link the ICS to the existing processes

Starting point BThe ICS is well establishedAn ICS or risk management is in place, but an end-to-end view of the processes is missing.Next step: position risks and controls within a process architecture

Shared goalIntegrated management systemProcesses, risks, controls and requirements are linked, up to date and verifiable at any time.

## What to expect from this expert series

How can process management be built up systematically and connected with governance, risk management and compliance? This question is the focus of the five-part BPM expert series by Swiss GRC in collaboration with [MINT Process Solutions](https://mint-processes.ch/).

The aim of the series is to show how process management and GRC can be connected along the entire BPM lifecycle. It focuses on the strategic foundations as well as on practical implementation and continuous improvement.

Along the BPM lifecycle, we examine five key phases. We show which prerequisites need to be in place, how risks and controls are integrated into processes and how their implementation and effectiveness can be ensured in the long term.

Five phases, one integrated management system

01Strategy & governance Process architecture and metamodel

02Analysis & modelling Risks and controls in the process model

03Optimisation & improvement Risk-based control design

04Implementation & execution Controls in day-to-day work

05Monitoring & controlling Measuring control effectiveness

Practical and concreteEach article is based on experience from numerous projects across a range of industries, from banks, insurers and health insurers to energy suppliers, industrial companies and public administrations. Each one includes:

A concrete approachfor the respective phase

Common pitfallsand tips on how to avoid them

Checklistto review your own status

Key takeawayswith the most important insights

Maturity self-checkto assess where you stand

Related at Swiss GRC

### Link processes and controls centrally

The BPM software maps the process architecture clearly and links workflows with roles, IT systems and requirements. Risks and controls are anchored directly in the process.

[View BPM software](https://swissgrc.com/en/bpm-software/)

In practice

## Key points at a glance

- Risks arise where processes are executed, and controls are only effective when they are anchored at the right point in the workflow.
- When processes, risks and controls are managed in separate tools, the result is duplicate data collection, contradictory information and a high audit effort.
- With the process architecture as a shared backbone, every piece of information is maintained only once, and the ICS stays up to date and verifiable.
- Whether the processes or the ICS came first: in both cases, the next step is integration.

FAQ

## Frequently asked questions

What is an integrated management system?

An integrated management system links processes, roles, IT systems, requirements, risks and controls in a shared structure. The process architecture serves as the backbone: every piece of information is maintained only once, and the same foundation applies to everyone involved.

Why should the ICS be anchored in the processes?

Risks arise where processes are executed, and controls are only effective when they are anchored at the right point in the workflow. An ICS managed separately from the processes can only be kept up to date and evidenced to auditors and supervisors with considerable effort.

Where should an organisation start?

That depends on the starting point. Organisations that already have documented processes should link the ICS to them next. Organisations with a well-established ICS or risk management should position risks and controls within a process architecture. The maturity self-check provides an initial assessment.

Which phases does the series cover?

The expert series follows the five phases of the BPM lifecycle: strategy and governance, analysis and modelling, optimisation and improvement, implementation and execution, and monitoring and controlling. Each phase shows how process management and GRC can be brought together step by step into an integrated management system.

## Where does your organisation stand?

Before the individual phases are covered in detail, an initial assessment is worthwhile. In just a few minutes, the maturity self-check shows how far process management and GRC are already developed and connected in your organisation. The results help you relate the upcoming articles to your own situation.

Maturity self-check
How integrated are process management and GRC in your organisation?
Get an initial assessment in just a few minutes.
[Start the self-check](https://reifegrad-assessment.mint-processes.ch/)

## Frequently asked questions

### Was ist ein integriertes Managementsystem?

Ein integriertes Managementsystem verknüpft Prozesse, Rollen, IT-Systeme, Anforderungen, Risiken und Kontrollen in einer gemeinsamen Struktur. Die Prozessarchitektur dient als Rückgrat: Jede Information wird nur einmal gepflegt, und für alle Beteiligten gilt dieselbe Grundlage.

### Warum sollte das IKS in den Prozessen verankert sein?

Risiken entstehen dort, wo Prozesse ausgeführt werden, und Kontrollen wirken nur an der richtigen Stelle im Ablauf. Ein getrennt von den Prozessen geführtes IKS lässt sich gegenüber Prüfern und Aufsichtsbehörden nur mit hohem Aufwand aktuell halten und nachweisen.

### Wo sollte eine Organisation beginnen?

Das hängt von der Ausgangslage ab. Wer Prozesse dokumentiert hat, verknüpft als Nächstes das IKS mit diesen Prozessen. Wer ein etabliertes IKS oder Risikomanagement hat, positioniert Risiken und Kontrollen in einer Prozessarchitektur.

### Welche Phasen behandelt die Expertenserie?

Die Serie folgt den fünf Phasen des BPM-Lebenszyklus: Strategie und Governance, Analyse und Modellierung, Optimierung und Verbesserung, Umsetzung und Ausführung sowie Überwachung und Steuerung.

### Was bringt systematisches Prozessmanagement?

Es schafft Transparenz darüber, wer was wann und mit welchen Systemen tut. Der Text nennt sechs Nutzenebenen: Effizienz und Qualität, Steuerbarkeit, Compliance und Risikomanagement, Business Continuity, Anpassungsfähigkeit und Wissenssicherung.
